Esso PG82E-10
Esso asphalt , Vietnam
Product Description
Esso PG82E-10 is a polymer modified asphalt. It contains a specific mixture of polymers that can provide additional resistance to rutting and cracking.
Applications
Esso PG82E-10 is used in hot mix asphalt for use on heavy traffic roads, airport pavements and other similar applications. Please consult supplier for specific usage and handling details.
Properties and Specifications
|
Property |
Unit of Measure |
Test Method |
Min. Limit |
Max. Limit |
|
Softening Point |
°C |
ASTM D36 |
80 |
|
|
Viscosity @ 135°C |
Pa.s |
ASTM D4402 |
|
3 |
|
Dynamic Shear Rheometer, G*/sin d, 82 C, Unaged Material |
kPa |
AASHTO T 315 |
1.0 |
|
|
Dynamic Shear Rheometer, G*/sin d, 82 C, Rolling Thin Film Aged Material |
kPa |
AASHTO T 315 |
2.2 |
|
|
Multiple Stress Creep & Recovery, Jnr 3.2 @ 82 C, after RTFOT |
1/kPa |
AASHTO T 350 |
|
0.5 |
|
Flash Point, Cleveland Open Cup |
°C |
ASTM D92 |
230 |
|
|
Elastic recovery at 25 C, 10 cm elongation |
% of new |
ASTM D6084 |
80 |
|
|
Storage stability, difference in softening point |
C |
EN 13399 |
|
5 |
|
Mass Change, RTFO residue |
% Loss |
ASTM D2872 |
|
1.0 |
|
Multiple Stress Creep & Recovery, %R 3.2 @ 82 C, after RTFOT |
% Change |
AASHTO T 350 |
80 |
|
|
Dynamic Shear Rheometer, G*sin d, 40 C, Pressure Aging Vessel Aged Material |
kPa |
AASHTO T 315 |
|
5000 |
|
Creep Stiffness after PAV, m-value at test temperature 0°C @ 60 sec. |
- |
ASTM D6648 |
0.30 |
|
|
Creep Stiffness after PAV, Stiffness value at Test Temperature 0°C @ 60 sec.. |
mPa |
ASTM D6648 |
|
300 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
06-2025